How to Install a Truck Tool Box Without Drilling

How to Install a Truck Tool Box Without Drilling

So, if you want to learn the successful strategy for installing the no-drilling toolbox, you can follow a comprehensive guide below, and How to Install a Truck Tool Box Without Drilling mount will help you know correctly.

Learning How to Install a Truck Tool Box Without Drilling mount increases by the day. Yes, there are numerous causes for knowing.

How to Install a Truck Tool Box Without Drilling

According to most truck owners, installing a DIY truck toolbox doesn’t go well with naivety, especially when it comes to drilling. But if your toolbox comes ready for installation with the necessary materials and drilled holes, it would take no more than three hours to get everything in its right place. If you want to know How to Install a Truck Tool Box Without Drilling mount, read to the end for the nitty-gritty.

Hand tools and power tools are incredibly vital to many job sectors and industries as the following list.

Toolboxes protect the truck bed from scratches, damage, and rust caused by unstable loads. They keep your cargo and tools in place, preventing them from flying off. Read on more to know How to Install a Truck Tool Box Without Drilling mount.

How are truck tool boxes kept in place?

Most people choose to install truck beds directly behind the cab. Wherever you choose, make sure you can easily open the toolbox. Measure the width of the box, and then cut the rubber or foam padding to fit on the rails of your truck to protect it from scratches. Then place the box on the padding or lining of the bed.

How to Install a Truck Tool Box | Materials Needed

  • The right toolbox for trucks
  • Measuring tape
  • Wrench
  • Wrench or screwdriver
  • Safety gloves
  • The ideal screws
  • Filling materials
  • Aluminum J-Hooks
  • Nuts, especially aluminum ones.
  • Heavy-duty bolts
  • Protective clothes

Get the best toolbox for your truck.

Now that you have gathered all the tools and materials, you need to search for the best toolbox. Make sure the toolbox you buy can accommodate the tools and equipment you have or plan to buy. The kinds of toolkits on the market vary in style and application.

Side Tool Boxes are designed to be installed along the truck bed and are suitable for more comprehensive tools. Cross Tool Boxes install along the loading dock and are ideal for more extensive tools. As for fifth wheel tool boxes, they are designed to store smaller tools.

Choose the right truck toolbox size and type for your specific needs. Consider stainless steel tool boxes as they perform better and guarantee a longer life.

Having trouble covering your truck bed? Here’s how to modify the canvas cover to fit your toolbox.

Deciding where to install the toolbox

Next, choose a convenient location in your truck bed to install the tool box. The installation process will depend on the toolkit you selected earlier. If you opted for a cross tool box, you would need to install it across the width of the cargo bed.

For those who bought side tool boxes, they would have to identify a convenient spot on the bed of their truck where if you install the box lengthwise, it will fit perfectly. If you choose a fifth wheel tool box, you will have control over how and where to install the box, based on your personal taste.

While deciding where to install the tool box, choose a convenient location where the cross rails are not an obstacle, and the box lid will open smoothly. You can speed up and smooth everything by taking the measurements from the toolbox and the selected point first.

Take accurate measurements| How to Install a Truck Tool Box

You should make sure you are not making a mistake. Take precise measurements of the toolbox and truck bed to assess compatibility. Use a tape measure to accurately measure the height, length, and width of the toolbox.

Also, measure the truck bed to find out where the tool box fits perfectly; installing the toolkit before taking measurements would be a recipe for costly mistakes.

Assemble the filler materials | Truck bed toolbox mount

Mounting a toolbox in the bed of your truck threatens to damage the cargo area. Even if you install it carefully, there is a chance that it will ruin the bottom and sides of the truckload. You do not want to expose your truck’s cargo area to damage, which is why you should consider installing foam padding underneath and to the sides of the cargo area before mounting the toolbox.

Use the measurements from the toolbox you obtained above to measure and cut the foam padding to size. Place the filler safely and precisely in the area where you want to mount the toolbox. If your truck has a body liner, you do not need to install the foam padding.

Align the tool box with drilled holes | Truck tool box mounting kit

If you’ve read this far, it merely means that your toolbox comes with pre-drilled holes. Most cargo compartments have pre-drilled holes in the area near the bottom. Most of these holes accompany rubber plugs. They should be removed to facilitate alignment.

Begin by removing the plugs and positioning the box correctly in line with the pre-drilled holes. Open the lid so you can quickly line up the holes in the bottom and the rail of the truck bed.

Attach the bolts and J-hooks

Once the holes in the truck bed and toolbox are aligned, insert the J-hooks and bolts. The purpose of the J-hooks and bolts is to attach the tool kit to the truck bed tightly. You have to use about six J-hooks to optimize the strength of your work.

You must decide the right sort and size of J-Hooks to use for your tool-box. Confirm to make sure the bolts, nuts, and J-hooks line up correctly with the tool kit. That is to avoid problems with irritating sounds coming from the poorly adjusted toolbox.

Tighten the nuts and bolts

Once you have attached the J-hooks and bolts, you need to tighten them. Use a wrench or open-end wrench to do this job. Do not apply more force than necessary when tightening the bolts and nuts, as this could damage the bed rails.

It is better not to make a little effort, as that would mean that the box will not be fixed appropriately. That can leave gaps between the box and the tool box, which could lead to irritating vibrations when driving the truck.

Make sure you got it right.

Check to make sure the tool box has been properly and firmly installed on the truck bed. Try opening the lid to see if it opens smoothly. Please confirm to make sure nothing is vibrating or shaking when you start the truck. Clean the truck bed and tool kit of all leftover materials and supplies.

Ending

This article has touched on the basics of How to Install a Truck Tool Box Without Drilling mount. Follow the steps one by one and install the toolkit correctly. It would be best if you had a minimum time to complete the job successfully. The success of your toolbox installation project will depend on how accurately you follow the tips outlined above.

To optimize the quality of the final work, it is best to use heavy-duty stainless steel J-hooks and bolts.

Use aluminum nuts and bolts as they are more durable and reliable. Ensure that the bolts and nuts you use are strong enough to withstand the threats posed by extreme vibrations on rough terrain.

Travel-Guide

Hi, I am Brian and I do write on the travel guide, travel accessories and travel tents. This site hosts all of my writing on the travel guide, travel accessories and travel tents.

Leave a Reply